TYPE 2:
Words are built up from left to right, a single character
at a time. When the display is full, it is cleared and the
subsequent words are displayed the same way until all
words of the title have been shown.
Tuner Setting
Tuner is selected on the setup main menu in step 2.
Setting The TUNER (FM) Frequency Step (TUNER
FREQ)
During manual tuning, you can select the frequency step
for FM analog radio station searching.
Setting item:
TUNER FREQ
Setting contents:
200KHZ (Initial setting) / 100KHZ
Setting The TUNER (FM) Tone Quality
This unit can set your preferred tone quality for FM radio
source.
•
Setting item:
FM Tuner Setup
Setting contents:
Hi-Fi / Normal (Initial setting) / Stable
Hi-Fi:
High-quality setting
Normal:
Standard setting
Stable:
Control noise
1. Press and hold AUDIO/SETUP for at least two sec-
onds to activate the SETUP mode.
2. Turn the Rotary encoder to select Tuner Setting, and
press
/ENTER.
3. Turn the Rotary encoder to select FM Tuner Setup, and
press
/ENTER.
4. Turn the Rotary encoder to select either Hi-Fi, Normal
(Initial setting) or Stable, and press
/ENTER.
5. Press and hold AUDIO/SETUP for at least two sec-
onds to return to normal mode.
74
SETUP
