2. Turn the Rotary encoder to select the General mode,
and then press
/ENTER.
3. Turn the Rotary knob to select Clock Adjust, and then
press
/ENTER. The time indication will blink.
4. Turn the Rotary knob to adjust the hours while the
time indication is blinking.
5. Press
/ENTER.
6. Turn the Rotary knob to adjust the minutes while the
time indication is blinking.
7. Press and hold AUDIO/SETUP for at least two sec-
onds to return to normal mode.
NOTE:
•
To synchronize the clock to another clock/watch or
radio time announcement, press and hold
/ENTER
for at least two seconds after setting the “hour.”
Minutes will reset to 00. If the display shows over
“30” minutes when you do this, the time will
advance one hour.
•
Pressing
returns to the previous SETUP mode.
•
If no operation is performed for 60 seconds, SETUP is
canceled.
Controllable With Remote Control
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine dealer.
Point the optional remote control transmitter at the
remote-control sensor (1).
Connectable to Remote Control Interface Box
With an optional Alpine Steering Wheel Remote Control
Interface Box, this unit is controllable from the vehicles
steering wheel controls. For details, contact your Alpine
dealer.
Remote Control Sensor
20
GETTING STARTED
