2. When the error indication remains after ejecting, press
the
button again.
If the error indication still does not turn off after
pressing the
button for a few times, consult your
authorized dealer.
•
When “Error” is displayed:
If the disc cannot be ejected by pressing
, press the
RESET switch (refer to “Initial System Start-Up” on
page 18) and press
again. If the disc still cannot be
ejected, consult your authorized dealer.
Protect
•
A copy-protected WMA file was played back.
– You can only play back non-copy-protected files.
Unsupported
•
A sampling rate/bit rate not supported by the unit is
used.
– Use a sampling rate/bit rate that is supported by the
unit.
No Support
•
An AAC format disc is inserted.
– Change to a disc of a supported format.
•
Text information that is not recognizable by the unit is
being used.
•
Change the text information to text that is supported
by the unit.
Flash Memory Messages
Error
•
Communication error or other error.
– You can solve the problem by switching the source,
turning ACC off/on, or turning power off/on.
Error-01
•
Communication error.
– You can solve the problem by switching the source,
turning ACC off/on, or turning power off/on.
Error-04
•
Abnormal current is run to the USB Flash Memory
device.
– You can solve the problem by turning ACC off/on,
or turning power off/on.
11
ADDITIONAL INFORMATION
137
