ON:
Select when you want to pair your Bluetooth compatible phone with this unit or use Bluetooth Audio
function.
1. Press and hold AUDIO/SETUP for at least two seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select “Bluetooth”, and then press
/ENTER.
3. Turn the Rotary encoder to select Bluetooth IN and then press
/ENTER.
4. Turn the Rotary encoder to select either OFF or ON (Initial setting) and press
/ENTER.
5. Press and hold AUDIO/SETUP for at least two seconds to return to normal mode.
Setting The Bluetooth Device
Select one of 5connected Bluetooth compatible devices that you previously registered.
•
Setting item:
Paired Device
1. Press and hold AUDIO/SETUP for at least two seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select “Bluetooth”, and then press
/ENTER.
3. Turn the Rotary encoder to select Paired Device and then press
/ENTER.
4. Turn the Rotary encoder to select a Bluetooth compatible device you want to use (you want to
change connection) and then press
/ENTER.
5. Turn the Rotary encoder to select “Connect” to connect the selected device.
The connected device is marked with
. Select “Disconnect” to disconnect this device.
Select “Clear” when you want to clear the device from the device list.
6. Press and hold AUDIO/SETUP for at least two seconds to return to normal mode.
NOTE:
•
If the connection is successfully changed, “Connected” is displayed for two seconds and the
indicator lights up, then the display returns to the SETUP screen.
•
If a Smartphone is connected to this unit successfully, the
indicator lights up to show the
battery charge of the connected Smartphone. The
indicator lights up when the battery
charge is about 50%, the
indicator lights up when the battery charge is not enough, and it
blinks as a low level warning. The
indicator goes out when the battery is drained. At this
time, the Bluetooth function is unavailable due to the Smartphone powered off.
•
Indicator
(Signal Strength) will display the current signal strength of your service provider.
The
indicator goes out when the Smartphone is not in service area or receives no signal.
•
Depending on the connected Smartphone, the
(battery charge), and
(signal strength)
indicators may not be displayed.
•
If all the three positions have been registered, you cannot register the 4th device. To register
another device, you need to delete one of the devices from position one to three first.
E L E C T R O N I C S
90
