General Setting
The following settings can be adjusted in General Settings:
•
Clock Mode
•
Clock Adjust
•
AUX IN
•
AUX Name
•
Play Mode
•
Beep
•
Demo
Access the settings using the following procedure:
1. Press and hold AUDIO/SETUP for at least two seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select General, and press
/ENTER.
3. Turn the Rotary encoder to select Clock Mode, and press
/ENTER.
Setting The clock Display
You can select the clock display type, 12-hour or 24-hour, depending on your preference.
Setting The AUX SETUP Mode
You can input the audio of an external device, (such as a Portable audio player) to the AUX
connector of this unit.
Setting The AUX NAME Mode
You can change the AUX NAME display in the SETUP mode.
Turning Mute Mode On/Off (INT MUTE)
If a device having the interrupt feature is connected, audio will be automatically muted whenever
the interrupt signal is received from the device. Make sure the Audio Interrupt In Lead (Pink/Black)
is connected to the terminal where the voltage becomes 0 V (GND) when a sound from External Unit
is input into AUX. Otherwise, this function may not operate.
Play Mode
This unit can play back CDs containing both CD and MP3/WMA/AAC data (created in Enhanced CD
(CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In
this case, you can select playback of a single session only, containing the CD data. When a disc
contains both CD and MP3/WMA/AAC data, playback starts from the CD data portion of the disc.
NOTE:
Perform this setting before inserting a disc. If a disc has already been inserted, remove it first.
E L E C T R O N I C S
84
