Alfa Romeo 4C 2017 User Manual Download Page 118 | Manualshive

Page: 118 / 172

background image

prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after

replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate

tires and wheels allow the TPMS to continue to function properly.

CAUTION!

The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and
warning have been established for the tire size equipped on your vehicle. Undesirable system
operation or sensor damage may result when using replacement equipment that is not of the
same size, type, and/or style. Aftermarket wheels can cause sensor damage. Using aftermarket
tire sealants may cause the Tire Pressure Monitoring System (TPMS) sensor to become
inoperable. After using an aftermarket tire sealant it is recommended that you take your vehicle
to an authorized dealer to have your sensor function checked.

– Engine Temperature Warning Light

This light warns of an overheated engine condition.

If the light turns on or flashes continuously while driving, safely pull over and stop the vehicle. If the

A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the vehicle. If the

temperature reading does not return to normal, turn the engine off immediately.

We recommend that you do not operate the vehicle or engine damage will occur. Have the vehicle

serviced immediately.

WARNING!

A hot engine cooling system is dangerous. You or others could be badly burned by steam or
boiling coolant.

– Seat Belt Reminder Light

When the ignition switch is first turned to ON/RUN, this light will turn on if the driver’s seat belt is

unbuckled, and a chime will sound. When driving, if the driver’s seat belt remains unbuckled, the

Seat Belt Reminder Light will illuminate, and the chime will sound.

WARNING!

Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have
failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle checked
immediately.

– Brake Warning Light

This light monitors various brake functions, including brake fluid level and parking brake applica-

tion. If the brake light turns on, it may indicate that the parking brake is applied, that the brake fluid

level is low, or that there is a problem with the brake system master cylinder reservoir.

W H A T T O D O I N E M E R G E N C I E S

116

«
...
116
117
118
119
120
...
»

Summary of Contents for 4C 2017













































































































































































Reviews:

No comments

Related manuals for 4C 2017

HOIST-A-TOP JL CRANK

Brand: Lange Originals Pages: 13

Brand: Prorack Pages: 14

Brand: Honda Pages: 208

CB-796IG2-CIGD-R

Brand: CARRYBOY Pages: 4

Brand: GMC Pages: 428

autoSteady AS101

Brand: Enduro Pages: 48

2005 JR41 Stratus

Brand: Dodge Pages: 293

Brand: Belkin Pages: 2

Brand: Quadratec Pages: 14

Brand: Air Lift Pages: 28

Brand: Dolphin Pages: 16

Brand: RAM Pages: 148

Brand: Hamron Pages: 36

CHALLENGER HELLCAT 2017

Brand: Dodge Pages: 484

Brand: Renault Pages: 11

Brand: Kargo Master Pages: 17

Brand: Safe Fleet Pages: 2

Brand: walser Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands