Alfa Romeo 4C 2017 User Manual Download Page 130

Page: 130 / 172

When using a tow eye, be sure to follow the “Tow Eye Usage Precautions” in this section.

Tow Eye Usage Precautions

•

Ensure that the tow eye is properly seated
and secure in the mounting receptacle.

•

The tow eye is recommended for use with an
approved tow bar and or rope.

•

Do not use the tow eye to pull the vehicle
onto a flatbed truck.

•

Do not use the tow eye to free a stuck vehicle.

WARNING!

Stand clear of vehicles when pulling with tow eyes.
•

Do not use a chain with a tow eye. Chains may break, causing serious injury or death.

•

Do not use a tow strap with a tow eye. Tow straps may break or become disengaged, causing
serious injury or death.

•

Failure to follow proper tow eye usage may cause components to break resulting in serious
injury or death.

Tow Eye

Tow Eye Warning Label

W H A T T O D O I N E M E R G E N C I E S

128

Summary of Contents for 4C 2017













































































































































































Search results

Summary of Contents for 4C 2017

Reviews:

Related manuals for 4C 2017

Brands by name

Popular brands

Alfa Romeo 4C 2017, User Manual

Search results

Summary of Contents for 4C 2017

Reviews:

Related manuals for 4C 2017

Brands by name

Popular brands