Dear Customers!
Thank you for purchasing Commo Compact 32 boiler. Please read the entire Operation Manual carefully before installing and
using your Commo Compact 32 boiler. Heating devices (hereinafter referred to as "pellet boiler s" or "boiler s") produced by
company “Alfa Plam JSC” are designed, manufactured and tested in accordance with the requirements of the applicable
European Safety Standards Directives.
This Manual is intended for the boiler users, installers, and technicians authorized to use the Como Compact 32 Pellet Boiler
. If you have any questions related to this Manual, or if you need any clarification, please contact the manufacturer or an
authorized seller of “Alfa Plam”.
Any even partial printing, translation and reproduction of this Manual is subject to the approval of “Alfa Plam”. The boiler
uses pellets as fuel. The boiler works automatically by loading pellets by the screw feeder from the pellet tank that is part of the
device located behind the boiler unit. The pellet tank r is filled from above through the designated lid. Make sure that the boiler
is properly dimensioned with regard to the heating system and the thermal needs of the facility. The device should be connected
and started by a person authorized by “Alfa Plam”.
The flame that develops in the boiler during normal combustion of wood biomass emits exactly the same quantity of carbon
dioxide (CO
2
) that would be released as a result of the natural decomposition of wood. The quantity of CO
2
obtained by the
combustion or decomposition of wood corresponds to the quantity of CO
2
the tree had absorbed during its life cycle and had
turned into oxygen and carbon. By using non-renewable energy sources (coal, fuel oil, gas), contrary to what happens with wood,
a much larger quantity of CO
2
is released into the air. Over the years, it has been accumulating and contributing to the
enhancement of the greenhouse effect. The principle of clean combustion meets all environmental protection requirements, and
“Alfa Plam” has directed all of its development and its activities towards meeting this goal.
FIRST OF ALL YOU NEED TO KNOW:
-THE BOILER IS A COMPLETE PRODUCT WHICH INCLUDES ALL ELEMENTS NECESSARY FOR THE HEATING SYSTEM,
THEREFORE YOU DO NOT HAVE ANY EXTRA COSTS, AND THESE ELEMENTS ARE:
CIRCULATION PUMP RS 30/6, FITTED ON THE RETURN PIPE. THE SECOND PUMP IS NOT REQUIRED FOR SPECIAL
HEATING (FLOOR, WITH ACCUMULATING BOILER, ETC),
18-LITRE EXPANSION TANK ENOUGH FOR 37.5 KW HEATING POWER,
AUTOMATIC AIR VENT VALVE SET ON THE HOT WATER OUTLET FROM THE BOILER ,
SAFETY VALVE INSTALLED ON THE HOT WATER OUTLET FROM THE BOILER ,
FILL AND DRAIN COCK, INSTALLED ON THE LOWEST POINT OF THE BOILER ,
NON-RETURN VALVE R5 / 4 "INSTALLED ON THE HOT WATER OUTLET FROM THE BOILER WHICH PROTECTS THE
BOILER FROM CONDENSATION.
WATER PRESSURE SENSOR IN THE BOILER , WHICH TURNS OF THE BOILER IN CASE OF TOO LOW OR TOO HIGH WATER
PRESSURE IN THE HEATING SYSTEM.
YOU SHOULD PARTICULARY BE FAMILIAR WITH THE FACT THAT THE MAIN CHARACTERISTIC AND THE GREATEST
ADVANTAGE OF THESE BOILER S IS THE INSTALLED MECHANISM FOR AUTOMATIC MECHANICAL CLEANING OF THE FIREBOX.
THIS UNIQUE PATENTED SYSTEM, WHICH DOES NOT ALLOW INCOMBUSTIBLE PELLET PARTS TO PILE UP AT THE BOTTOM
OF THE FIREBOX, IT PREVENTS THE SO CALLED "CEMENTING", AND IT DOES NOT ALLOW THE OPENING AT THE BOTTOM OF
THE FIREBOX TO CLOSE. THIS SYSTEM ENABLES:
-COMBUSTION OF LOWER QUALITY PELLET (BUT NOT THE WORST QUALITY).
-GREATER AUTONOMY OF THE BOILER OPERATION, AND IT ENABLES THE BOILER TO OPERATE FOR A LONGER TIME
WITHOUT BEING CLEANED.
YOU SHOULD ALSO KNOW THAT THERE ARE TWO LARGE ASHTRAYS IN THE BOILER WHICH GIVE A HIGHER AUTONOMY
AND PROVIDE LONGER OPERATION OF THE BOILER WHICH MEANS YOU CAN CLEAN IT EVERY FEW DAYS (DEPENDING ON THE
PELET CONSUMPTION AND QUALITY).
THE BOILER ALSO CONTAINS A PELLET TANK WHICH COLLECTS 70 KG OF PELLETS. HOWEVER, THE BOILER MAY ALSO BE
CONNECTED TO A SPECIAL, BIG PELLET RESERVOIR (TANK) INSTALLED NEAR THE BOILER FOR COLLECTING 300 - 500KG OF
PELLETS, AND THIS ADDITIONAL TANK WOULD COMPLEMENT THE OPERATION OF THE INSTALLED PELLET TANK WHEN
NECESSARY.
DUE TO THE EXTENDED HEIGHT OF THE BOILER AND DIFFICULTIES WITH FEEDING THE PELLETS INTO THE TANK, THE
BUYER MAY PROVIDE LOW LADDERS, OR IN OTHER WAY FACILITATE FEEDING THE PELLETS INTO THE TANK.
CAUTION
-
The minimum installed power of the heating system must not be less than 65% of the boiler’s rated of the boiler, and the
maximum power of the system must not exceed 100% of the boiler’s rated power.
-The flue connected to the boiler must meet the requirements set in the user manual.
-To connect the appliance to the flue, do not use flexible hoses instead of flue pipes.
- Regular maintenance and care, such as cleaning the boiler, flue pipes and nozzles (pipes), are important for safe operation, and
especially for effectiveness and maintenance value of the boiler.
- Do not perform any unauthorized modification to the appliance, as any unauthorized modification will void the warranty.
