Alfa Plam CFH XILA, Instructions For Installation, Use And Maintenance Manual

Page: 20 / 26

17
When you access the menu the upper display shows current recipe.
To modify the recipe click
K5 key; the upper display blinks.
K3/K7 keys increase/decrease theset value. To store the setting click K5 keyor K1 key to exit. To return to User menu 2 settings press K1 key.
CLOCK M ENU
Clock menu allows modification of current date and time.
The upper display shows oroL . Click K5 key to access the menu.
The upper display showshours and minutes. The lower display shows the day of the week.
CLOCK PROGRAMMING PROCEDURE
Instructions Display
Press K5 to access changes. Set value (hours, minutes, day) blinks. Modify value
using K3/K7 keys.
Press K5 keyto switch to parameter changes.
Again press K5 to store the set value.
07. 33
Mo
To return to User menu 2 settingspressK1 key.
NOTE: Properchange of this functionis critical for function of automatic start up and the stove operation.
REM O TE CO NTRO L M ENU
Remote control menu allows activation/deactivation of remote control.
The upper display shows
tELE . Click K5 key to access the menu .
To modify parameter click K5 key;the upper display blinks.
K3/K7 keys modify the value fromSWITCHED OFFto SWITCHED ON (or vice versa).
To store the setting click K5 keyor K1 key to exit. To return to User menu 2 settings press K1 key.
SYST EM M ENU
This menu allows access to System menu . The upper display shows tPAr .
ATTENTION: This menu cannot be accessed because it is only for the technical assistance network.
MAINTENANCE
Routine maintenance
The stove has to be maintained periodically in order to secure its proper and efficient functioning.
Routine maintenanceis performed by the customer.
To ensure durability and proper function, the device is designed with less moving parts which could, in time, cause uncontrolled
air intake and thus endanger the combustion quality.
ATTENTION: Cleaning activities described below must be performed only when the stove is completely cold and disconnected
from the power supply.
ATTENTION: The stove can be disconnected from the power supply in two ways: switching off the rear side power keyor
pulling out the power cord from the socket (either the wall socket or stove rear side connection plug).
The combustion chamber (marked A in Figure 6.1) is automatically cleaned during the extinguishing phasein order to secure the prescribed
air flow into the combustion chamber. If there is any pellet left in the combustion chamber, removeit manually by brush or vacuum cleaner.
ATTENTION: The cleaning of side areas of the combustion chamber with a vacuum cleaner before activation is recommended.
Do not make any modifications on the combustion chamber.