4
Bad draught of the flue (bad flue), the stove is improperly used, for example, the supply of oxygen is dampened too early.
We cannot influence on these factors.
For this reason we do not provide a guarantee for clean glass
.
OPENING FOR CLEANING
Fig. 4
Behind the protective cover of the opening for cleaning, there is a cover (figure 4 position 11).
It is fastened with a butterfly nut at the front side of the stove and in order to clean the internal part of the stove, it should
be removed.
Before re-screwing it, you need a sealing braid which is on the cover in order to control the sealing, and if necessary, it
should be changed.
MAINTENANCE AND CLEANING OF THE COOKIING PLATE
For cleaning of the cooking plate, use small sandpaper or abrasive. And during cleaning of the plate, wipe it with a semi-
wet towel and in the end with a dry towel. Make sure that the stretching grooves on the cooking plate remain free with no
crust, in order to enable stretching of the plate as an action of heat.
Baked food scraps or parts of slag in the grooves may cause deformation of the cooking panel.
Do not leave pots or pans on the cold cooking plate, edges may be created by corrosion, which are difficult to remove.
REMOVAL OF SLAG AND ASH
Slag is removed with the supplied accessories, with blade for ash.
The ashtray should be emptied on a regular basis prior to each kindling.
You should clean the trash rack 1-2 times per week. It the air openings are clogged with slag, crust or some other
burning remains, take out the trash rack and clean it.
GENERAL NOTES
If you follow the instructions for installation and handling, the stove represents safe household appliance.
All drawbacks of Your stove can be removed at our customer service department.
For complaints related to mistakes which occur or drawbacks in terms of functionality, contact our customer service
department. The same helps in the supply of spare parts (it uses only original parts).
The entire stoking unit must be regularly inspected by an expert.
11
