Alfa Laval LeviMag, Instruction Manual, Page: 8 / 68

2 Safety and information
Transportation:
Always ensure that no leakage of lubricants can occur.
Always ensure that the unit is securely fixed during transportation.
Always use original packaging or similar during transportation.
Avoid drive unit to be attached to weld plate during transportation – if necessary avoid undue vibrations or shocks.
Avoid mixing head and drive rotor to be exposed to magnetic particles as they will stick to the parts and will require manual
removal.
Incorrect installation, mounting and use, removal of security elements, lack of inspections, lack of maintenance and improper
connections may cause severe personal injury or property damage. Therefore, it is important that the mixer is being transported,
handled, installed, started, controlled, serviced and repaired correctly exclusively by qualified personnel.
2.4 Intended use
1. The Alfa Laval LeviMag
®
is only for mixing/stirring of liquids in a tank.
2. The mixer is only for mounting positions/angles as specified on the name plate and in 8.8 Mounting angle.
3. The different duties and operation like pressure, speed and media temperature which the mixer is designed for must be
followed, see section 4.2 Speed and 4.3 Temperature.
4. If the mixer is installed in pressurized tanks, local regulations and legislations must be met.
2.5 Unpacking/delivery
The instruction manual is part of the delivery.
Study the instructions carefully.
Always use adequate lifting equipment when handling the mixer.
!
CAUTION
Alfa Laval cannot be held responsible for incorrect unpacking.
Step 1
Inspect the delivery for visible transportation damages - all issues to be reported to carrier.
Inspect for oil leaks from gear motor caused by leaking vent valve protection (see section 3.8 Start-up) – if leakage is observed -
oil level in gear motor must be verified (total oil amount in gear motor to be found on gear motor name plate).
8