Alfa Laval LeviMag, Instruction Manual, Page: 46 / 68

8 Technical data
8.8 Mounting angle
The gear motor is are filled with oil that enables it to be mounted as described below – please ensure that the position of the
weld plate lives up to the requirements below.
α
4307-0052
β
4307-0053
γ
δ ε
4307-0054
The gear motor (position 8 in section 10.3 Drive unit - WP50 and section 10.4 Drive unit - WP81) can be selected in different
configurations - and regarding mounting angles in two different configurations for
α
.
The gear motor should be mounted with motor pointing upwards (
β
= 0 and
γ
= 0).
If the gear motor has to be positioned slightly to the right or left (
β ≠
0 or
γ ≠
0) to avoid inference with tank legs or other
obstructions, angle
α
together with
β
or
γ
will result in that the gear motor are rotated slightly to the right (
ε
) or to the left (
δ
).
The allowable angles for
ε
and
δ
are:
Designation Angle
α
0°-22° 23°-45°
δ
max. 5° max. 5°
ε
max. 5° max. 5°
46