Alfa Laval LeviMag, Instruction Manual, Page: 13 / 68

3 Installation
The instruction manual is part of the delivery.
Study the instructions carefully and pay special attention to the warnings!
The mixer is for permanent fastening.
Make sure that the motor corresponds to the environment.
Step 5
(Optional)
Remove the male bearing tool from the bearing by pulling it
upwards.
4307-0020
3.3 Impeller
WARNING
It is important that the impeller is mounted before installing the drive unit.
Always keep electrically controlled medical devices away from mixing unit (e.g. cardiac pacemaker).
♥
䵭
CAUTION
Always be sure that the weld plate is correctly installed in the tank and that it has not been deformed during the welding process.
See guide in "Welding guidelines for Alfa Laval LeviMag
®
".
Step 1
Remove foreign magnetic particles from the mixing head (can
be time consuming or difficult if mixing head has been exposed
to magnetic particles which must be removed mechanically and
manually).
NOTE
If the mixing head must be placed on a table, place the magnets
upward to prevent magnetic particles to stick to the magnetic
surface of the mixing head.
4307-0021
Step 2
(Optional)
Use the impeller lifting device to install the impeller in the tank.
Lift the impeller carefully with the impeller lifting device.
NOTE
If needed - mount the impeller lifting device to the lifting rod.
4307-0022
1
2
13