Alfa Laval ALP 15-85 Manual Download Page 53

Page: 53 / 59

Transportation, storage and disposal

8.3.4

Removing the preservation

Aids:

Solvent

Steam-jet cleaning device with
wax-dissolving additives

WARN

ING

Risk of injury through emitted preservative
oil.

Wear protective clothing during all the work.

Remove the blind flange with caution to relieve any
pressure inside the pump.

Collect the emitted oil safely and dispose of it in an
environmentally compatible manner.

Clean the outside of the pump with
solvents, if necessary using a steam-jet
cleaning device.

Remove the blind flange on the pressure
side.

Drain the pump, collecting the preservative
oil in a suitable vessel.

Remove the blind flange on the suction
side.

To remove the residual oil, rinse the pump
with the pumped liquid.

8.4

Disposing of the pump

Aids:

Solvents or industrial cleaners suitable for
the pumped liquid

Summary of Contents for ALP 15-85




























































Search results

Summary of Contents for ALP 15-85

Reviews:

Related manuals for ALP 15-85

Brands by name

Popular brands

Alfa Laval ALP 15-85, Manual

Search results

Summary of Contents for ALP 15-85

Reviews:

Related manuals for ALP 15-85

Brands by name

Popular brands