5 Installation
Unsafe practices and other important information are emphasized in this manual.
Warnings are emphasized by means of special signs. All warnings in the manual are summarized on this page.
Pay special attention to the instructions below so that severe personal injury or damage to the top unit are avoided.
5.1
Installation on air actuators
Step 1
Always read the technical data thoroughly.
Always have the ThinkTop
®
electrically connected by authorised
personnel.
Step 2
1. Fit the air fittings on actuator if not mounted.
2. Fit the activator stem (magnet) and tighten carefully
with a spanner.
SRC/ARC only
Step 3
1. Place the ThinkTop on top of the actuator.
2. Make sure X-ring is mounted.
85
Step 4
1. Ensure that the unit is correctly mounted by pressing down
on top of the ThinkTop.
2. Tighten the two Allen screws carefully (1.50 Nm).
3. Turn the actuator to have LEDs in a front view.
12
