5 Installation
Unsafe practices and other important information are emphasized in this manual.
Warnings are emphasized by means of special signs. All warnings in the manual are summarized on this page.
Pay special attention to the instructions below so that severe personal injury or damage to the top unit are avoided.
Step 5
Fit the ø6 mm (1/4”) air tubes to ThinkTop.
(see drawing “Air connections” page 16).
Step 6
Fit the air tubes to the actuator
(see drawing “Air connections” page 16).
TD 800-131
Step 7
Untighten the four screws and pull off cover of ThinkTop.
TD 800-247
Step 8
1. Install cable (if not present) through the cable gland.
2. Connect the ThinkTop electrically
(see page 5.4 Electrical connection, internal).
TD 800-248
13
