Alfa IN PEGAS 40 PLASMA PFC, Operating Manual, Page: 5 / 18

-5-
ALFA IN a.s © www.alfain.eu 3
•
The kinds of fumes and gases from the plasma arc depend on the kind of
metal being used, coatings on the metal, and the different processes. You
must be very careful when cutting or welding any metals which may contain
one or more of the following:
Antimony Chromium Mercury
Nickel Cobalt Arsenic
Barium Copper Selenium
Beryllium Lead Silver
Cadmium Manganese Vanadium
•
Always read the Material Safety Data Sheets (MSDS) that should be
supplied with the material you are using. These MSDSs will give you the
information regarding the kind and amount of fumes and gases that may be
dangerous to your health.
•
It is very important to arrange for sufficient ventilation, especially when
cutting in enclosed spaces. We suggest using suitable fume extractors to
prevent the risk of intoxication by fumes or gas generated by the cutting
process.
•
Noise can cause permanent hearing loss. Plasma arc processes can cause
noise levels to exceed safe limits. You must protect your ears from loud
noise to prevent permanent loss of hearing.
•
To protect your hearing from loud noise, wear protective ear plugs and/or
ear muffs. Protect others in the workplace.
•
Noise levels should be measured to be sure the decibels (sound) do not
exceed safe levels.
•
The operator must ensure all flammable materials are removed from the
work area to avoid any risk of fire.
•
The operator must NEVER cut containers that have previously contained
petrol, lubricants, gas or similar flammable materials, even if the container
has been empty for a considerable time. THERE IS A VERY HIGH RISK
OF EXPLOSION.
•
The operator must be aware of all the special regulations which he needs
to conform to when cutting in enclosed spaces with a high risk of explosion.
•
To prevent electric shock, we strongly suggest the following rules:
•
Do not work in a damp or humid environment.
•
Do not use the machine if its cables are damaged in any way.
•
Make sure that the earthing system of the electric equipment is
correctly connected and operational.
•
The operator must be insulated from the metal components
connected to the return wire.
•
The earthing of the piece being worked could increase the risk of
injury to the operator.
•
EN 60974-1 Standard: Open-circuit voltage. During the operation of the
machine, the highest voltage, with which it is possible to come into contact,