-17-
ALFA IN a.s ©
www.alfain.eu
3
plasma cut can cause metal particles to interfere with sensitive electronic
components and cause damage to the welder.
•
To clean the plasma cut, disconnect it from the mains supply voltage then
open the enclosure and use a vacuum cleaner to remove any accumulated
dirt and dust. The plasma cut should also be wiped clean. If necessary,
solvents that are recommended for cleaning electrical apparatus may be
used.
•
Troubleshooting and repairing of PEGAS equipment should only be carried
out only by suitably qualified or competent person.
•
A ‘competent person’ must be a person who has acquired through training,
qualification or experience, or a combination of them, the knowledge and
skills enabling that person to safely carry out a risk assessment and repairs
to the electrical equipment in question.
•
The person carrying out the servicing needs and repairs must know what to
look at, what to look for and what to do.
9.
STATEMENT OF WARRANTY
•
In accordance with the warranty periods stated below, ALFA IN guarantees
the proposed product to be free from defects in material or workmanship
when operated in accordance with the written instructions as defined in this
operating manual.
•
ALFA IN products are manufactured for use by commercial and industrial
users and trained personnel with experience in the use and maintenance of
electrical welding and cutting equipment.
•
ALFA IN will repair or replace, at its discretion, any warranted parts or
components that fail due to defects in material or workmanship within the
warranty period. The warranty period begins on the date of sale to the end
user.
•
If warranty is being sought, please contact your ALFA IN product supplier
for the warranty repair procedure.
•
ALFA IN warranty will not apply to:
•
Equipment that has been modified by any other party other than ALFA
IN’s own service personnel or with prior written consent obtained from
ALFA IN Service Department.
•
Equipment that has been used beyond the specifications established in
the operating manual.
•
Installation not in accordance with the installation/operating manual.
•
Any product that has been subjected to abuse, misuse, negligence or
accident.
•
Failure to clean and maintain (including lack of lubrication,
maintenance and protection), the machine as set forth in the operating,
installation or service manual.
•
Within this operating manual are details regarding the maintenance