13/21
ALFA IN a.s. ©
www.alfain.eu
INSERTING THE WIRE TO THE TORCH AND CONNECTION OF GROUND
CABLE
Fig. 7 Connecting the ground cable and the torch
1. Connect the torch
B6
to connector
B8
on the machine while the machine is
turned off.
2. Connect the ground cable to the
terminal of welding cables (-)
B4.
3. Connect the ground clamps
B5
to the welder
B7
or to the welding table.
Notice
When inserting the wire do not point with torch to the eyes!
4. Remove the gas nozzle from the torch.
5. Unscrew the current nozzle.
6. Connect the machine to power supply.
7. Turn the main switch on the back panel to ON.
8. Press the button
19
to select the mode
MIG/MAG
9. Press the button
15
to select 2T or 4T.
10. Press the button
39
. The welding wire is fed into the torch. After coming
off from the torch tube, screw the current nozzle and gas nozzle on.
11. Before welding, spray the area in a gas hose and current nozzle with a
separation spray, to prevent damage.
