18/21
ALFA IN a.s. ©
www.alfain.eu
7. GETTING STARTED TIG
Getting started must be consistent with technical data and conditions of use.
Fig. 11
Connecting the ground cable and the torch
1. Connect the torch
B12
to the terminal of welding cables (-)
B13
, to the gas
connector
B14
and connector
B10
.
2. Connect the ground cable to the
terminal of welding cables (+)
B9
and
the
ground clamps
B11
to the welder
B7
or to the welding table
.
3. Connect the machine to power supply and turn the main switch on the back
panel to ON.
4.
Connect
the
gas hose and
gas flow adjustment
described
in ADJUSTMENT
OF GAS FLOW.
5. Press the button
19
to select the mode
TIG
.
6.
Use the potentiometer
31
to adjust
the welding current.
7.
Use the potentiometer
30
to adjust
the time of Slope down.
8. By means of the potentiometers
36
you can change the time of
Pre Gas
.
9. By means of the potentiometers
37
you can change the time of
Post Gas
.
