background image

14

after use or while changing glass 
lift the spout into the CLOSED 
position. (fig. 6)

 
Do not use the appliance for more 
than 10 minutes consecutively.

CLEANING

•  REMOVE THE PLUG FROM 

THE SOCKET. 

  Clean the appliance immediately 

after use to keep any pulp residue 
from drying, which would make it 
harder to remove.

•  Take hold of the container to 

disassemble the removable 
components and take them to the 
sink.

•  Disassemble the cone, sieve and 

container. (fig. 2)

•  Remove any pulp residue from the 

sieve.

•  Press the spout of the container 

down into the CLEANING 
position.

The spout can be positioned in three 
ways:

OPEN

: Press down on the spout to 

open the container and allow the
juice to flow into the cup.

CLOSED

: Lift the spout upwards to 

close the container, so that the
juice doesn’t trickle out.

CLEANING

: Press the spout all the 

way down in order to clean the
container. (fig. 7)

NOTE: Before the spout can be 
lowered into the CLEANING 
position the container must be 
removed from the motor unit.
 The spout cannot be detached from 
the container.

•  Wash the cone, sieve and container 

with hot water and washing-up 
liquid.

•  Rinse them carefully and dry well.

NOTE: The cone, the sieve and 
the container can be washed in the 
dishwasher, but place them in the top 
rack to avoid contact with the heating 
elements.
Also be careful about which 
detergents and additives are used
and what temperatures are reached 
during the wash cycle
as these factors may damage the 
surface finish of the product.

Clean the motor unit with a damp 
cloth ONLY.

 
 

ATTENTION!

NEVER IMMERSE THE MOTOR 
UNIT IN WATER AND NEVER 
RINSE IT UNDER RUNNING
WATER (FIG. 3)

•  Before storing the citrus juicer, 

wind the cable around the cable 
wrap and use the slot provided to 
lock it in place. (fig. 4)

IN THE EVENT OF 

MALFUNCTION

In the event of a malfunction or when 
in doubt, do not use
the citrus juicer and contact your 
trusted Alessi retailer.
Advice to help you address some 
minor issues
caused by mild distraction is provided 
below:

•  If the motor does not start:

-  Is the power cable plugged into the 

mains?

-  Does your household mains 

voltage match the specifications 
listed on the bottom of the motor 
unit?

MDL07 Plissé spremiagrumi.indd   14

MDL07 Plissé spremiagrumi.indd   14

26/11/20   10:45

26/11/20   10:45

Reviews: