User manual mod.
ALESSI
PHONE
8
ENGLISH
User manual mod.
ALESSI
PHONE
9
• Clean the base and the cordless with a
humid
cloth (with no
solvents) or antistatic. Do not use
under no circumstances
a dry
cloth because electrostatic charges could be generated that could
damage the cordless.
• In case the cordless should come in
contact with liquids
, switch it off
and immediately remove the battery. Leave the liquid flow out from
the cordless. Dry all parts with a cloth and keep the cordless
for at
least
72
hours
with the battery vane open and the keyboard facing
downwards in a warm and dry location (by no means insert it in the
oven, either in the microwave, gas or any other type of oven). Once
completely dried off, in many cases it will be possible to reactivate
the cordless even if problems could show up.
• In case of transportation of this product, make sure to use the original
packaging of the product in order to protect it from potential damages.
9 Disposal of the product
INFORMATION TO THE USERS
According to art. 13 of the Decree by Law dated July, 25
2005, n. 151 (Implementation of the Directives 2002/95/
CE, 2002/96/CE and 2003/108/CE, related to the reduc-
tion of the use of dangerous substances in electric
and electronic equipment, as well as the disposal of
wastes)
The symbol of the slashed trash bin reported on the equipment
or its package indicates that the product at the end of its lifetime
must be collected separately from the other wastes.
The user shall, therefore, deliver the equipment at the end of its life-
time to suitable separate electronic and electro-technical refuse col-
lection centres, or deliver it back to the reseller at the moment of pur-
chasing a new equipment.
A suitable separate collection for the subsequent delivery of the aban-
doned equipment to the recycling, the treatment and environmentally
compatible disposal contribute to avoid possible negative effects on
the environment and the health and favours the reuse and/or recycling
of materials of which the device is composed.
The illegal disposal of the product by the user entails the application of
the sanctions provided for by the regulations in force.
10 Using the telephone
Switch the cordless on and off
Keep the
key pressed for 1 second. To switch off the cordless,
keep the same key pressed for 2 seconds.
Placing calls
In pre-selection: dial the telephone number and press the key. Use
the right hand key DELETE to delete any erroneously typed digit.
With the line seized: Press the key and dial the number to call. In
case of error press
and start again.
During the call the blue LED on the base remains steady on.
Answering a call
• If the cordless is not placed on the base:
press the key or the
left function key ACCEPT to answer. Press
or the right function key
END to terminate.
• If the cordless is placed on the base
and the automatic answer
(section 17) is active (default setting), it is sufficient to lift on
to answer the call. If the automatic answer is not active, press the
key or the left key ACCEPT to answer.
During the ring phase the blue LED on the base will blink on and off
and the display will show, depending on the occasions:
•
“Calling”, if the calling number identification service (CLI) is not active
on the line.
•
The actual calling telephone number (after the first ring), when the
calling number identification service (CLI) is active on the line.
•
“Reserved”, when the calling number identification service (CLI)
is active but the calling partner is intentionally concealing its
telephone
number.
Hands-free
During a conversation press the key to activate the hands-free and
press it again to deactivate.
Adjusting the listening volume
Press the ▲▼ keys to adjust the listening volume during a conversa-
tion (both hands-free and normal conversation mode).
Options during conversation
During a conversation press the left key OPTION to access the fol-
lowing menu:
• PHONEBOOK:
to have access to the phonebook (see the “Phone
book” Section in this manual).
• MUTE:
to deactivate your microphone. To activate it again, press
the
right
key
ABILITA.
• HEAR VOLUME:
press the ▲▼ keys to adjust the volume. Press
BACK to return to the options menu. As an alternative it is possible
to press directly the▲▼ keys to adjust the listening volume during a
conversation
(both
hands-free
and
normal).
• WAITING:
to place the other party on hold with background music.
Press RESUME to goes back to conversation.
• INTERNAL CALL
:To place the external party on hold with back
ground music and call another cordless associated with the base of
ALESSIPHONE. When the called cordless answer the call, it will be
possible to have a three parties conference by pressing again
OPTION
>
CONFERENCE
.
• FLASH
:To exploit possible additional services, provided they are
offered by the telephone operator and enabled on the line. Refer to
your own operator for details on the use of these functions.
Ring tones (melody, volume, deactivation/reactivation)
Choice of the Melody: press
MENU > IMAGES & SOUNDS > SOUNDS >
EXTERNAL RING (or INTERNAL RING) > RINGING TYPE > OK
. Select
the melody with the ▲▼ keys, then confirm by pressing OK.
Volume adjustment : press
MENU > IMAGES & SOUNDS > SOUNDS
> EXTERNAL RING (or INTERNAL RING) > VOLUME > OK
. Set the
volume with the▲▼ keys, then confirm by pressing OK.
Deactivation of the ring tone: press
MENU > IMAGES & SOUNDS
> SOUNDS > EXTERNAL RING (or INTERNAL RING) > RINGING
MODE > OK
. Select STANDARD or ALWAYS OFF with the ▲▼ keys,
then confirm by pressing OK. When the ring tone for external calls is
deactivated (OFF), on the standby display the
icon will appear. As
an alternative it is possible to keep pressed for a while the * key to
activate or deactivate the external ring tone.
ATTENTION:
If the product is placed on charge with a wrong type of
battery a potential risk of explosion exists.
