Chapter 1 - Setting Up
14
QuadraVerb 2 Reference Manual
Stereo. In the case where a stereo instrument, such as a keyboard or sampler, is
connected to two separate channels of a mixing console, you will need two 1/4" TRS
cables, one for each channel. The connection is made in a similar fashion as
described above.
MIXER
Left
Master
Insert
Right Input
Right Output
Left Input
Left Output
Right
Master
Insert
Using Main Outputs
When you want to effect everything on the mixer, you can connect the QuadraVerb 2
between the mixer’s outputs and the amplifier’s or tape machine’s inputs. This is done
by using two 1/4" cables to connect the Left and Right Main Outputs of the mixing
console to the [L] and [R] INPUTs of the QuadraVerb 2. The [L] and [R] OUTPUTs of
the QuadraVerb 2 are then connected to a stereo amplifier, or two input channels of
another mixing console (for sub-mixing applications).
Left
Master
Out
Right Input
Right Output
Left Output
Left Input
Mixer
Stereo Amp
Left Input
Right Input
Right
Master
Out
If your mixer’s outputs use XLR balanced connectors, use the illustration below as a
guide for wiring cables to connect to the QuadraVerb 2’s inputs.
