Part 6: Editing Effects
64
QS6.1 Reference Manual
¥
If you press
[STORE]
twice while editing a Program assigned to the Effect
Channel, then both the Program and its Effects will be stored.
¥
If
[STORE]
is pressed twice while editing a Program on some
other
Channel than
the Effect Channel, then the edited Program will be stored with no change in its
previous Effect settings.
¥
If
[STORE]
is pressed twice while in Mix Edit Mode, then only the Mix
parameters will be stored. The settings for individual Programs and Effects
within the Mix will be left unchanged.
C
OPYING
E
FFECTS
F
ROM
O
NE
P
ROGRAM
T
O
A
NOTHER
When you want a Program to use the Effect from some other Program, you can copy
that other ProgramÕs Effect
into
the Program you are working on.
This is done, within Store Mode, using the
Copy Effect
function. This subfunction can
be found on one of Store ModeÕs many pages.
(Remember how to move around subfunctions? Just get to the function you want,
and then use the
[PAGE]
keys to cycle the display through all currently available
settings.)
One slight twist here is that you can only copy an Effect patch to a Program in the
User bank. The only way to copy an Effects patch onto a RAMcard is to copy the
Program which contains it. No problem! If youÕve just
got
to have that RAMcardÕs
Zither program going through that preset organÕs distorted Lezlie Effects patch, just
choose a location in the User bank to place the zither while you work on it. Once it
has been joined with the Effects patch you want it to have, store the Zither program
back to its original location on the RAMcard (or to a new one). The zither will carry
its Effects patch with it, as you know.
HereÕs the procedure for copying an Effect to the User bank:
1) Select the Program which contains the Effect you wish to copy.
2) Enter Store Mode.
3) Press
the
[PAGE
]
key three times and you will see the following display:
4) Press
the
[PAGE
]
key one more time so the cursor is under the ÒPÓ in ÒPROGÓ.
5) Use
the
[EDIT VALUE]
slider or the
[VALUE]
buttons to select the User Program
number that you would like to copy the current Effect to.
6) Press
[STORE]
.