Alesis qs6.1 Reference Manual Download Page 160

Page: 160 / 176

Part 9: Extras

QS6.1 Reference Manual

159

OADING A

ANK FROM AN

XTERNAL

ARD

The QS6.1 can access Program and Mix data directly from a card by using the

[

BANK

] buttons. However, there may be an instance where you want to load a full

bank from a RAM card into the User bank.

WARNING! This procedure will overwrite the entire contents of your User bank.
There is no Undo function! So be sure this is really what you want to do.

To overwrite the User bank with a Card bank, use this procedure:

➀

Insert the card into the card slot on the back panel.

➁

Press [

STORE

➂

Press [

PAGE

] twice.

This selects the ÒLOAD FROM CARDÓ option. The display will look like this:

➃

Use the [

CONTROLLER D

] slider or the [

VALUE]

buttons to select the bank on

the card you wish to load (A1ÐA4, etc.).

➄

Press [

STORE

] to transfer the data from the card into the QS6.1.

Summary of Contents for qs6.1

















































































































































































Search results

Summary of Contents for qs6.1

Reviews:

Alesis qs6.1, Reference Manual, Page: 160 / 176

Search results

Summary of Contents for qs6.1

Reviews: