background image

 

 

 

Warranty / Contact

 

 

 

33 

Alesis Limited Warranty 

 

ALESIS CORPORATION ("ALESIS") warrants this product to be free of defects 

in material and workmanship for a period of one (1) year for parts and for a period of 

one (1) year for labor from the date of original retail purchase. This warranty is 

enforceable only by the original retail purchaser and cannot be transferred or assigned. 

For the most effective service, the purchaser should register the purchase on the 

ALESIS website at http://www.alesis.com/support/warranty.htm. 

During the warranty period ALESIS shall, at its sole and absolute option, either repair 

or replace free of charge any product that proves to be defective on inspection by 

ALESIS or its authorized service representative. In all cases disputes concerning this 

warranty shall be resolved as prescribed by law. 

To obtain warranty service, the purchaser must first call or write ALESIS at the 

address and telephone number available on the Alesis Website to obtain a Return 

Authorization Number and instructions concerning where to return the unit for 

service. All inquiries must be accompanied by a description of the problem. All 

authorized returns must be sent to ALESIS or an authorized ALESIS repair facility 

postage prepaid, insured and properly packaged. Proof of purchase must be 

presented in the form of a bill of sale, canceled check or some other positive proof 

that the product is within the warranty period. ALESIS reserves the right to update 

any unit returned for repair. ALESIS reserves the right to change or improve design 

of the product at any time without prior notice. 

This warranty does not cover claims for damage due to abuse, neglect, alteration or 

attempted repair by unauthorized personnel, and is limited to failures arising during 

normal use that are due to defects in material or workmanship in the product. 

THE ABOVE WARRANTIES ARE IN LIEU OF ANY OTHER 

WARRANTIES OR REPRESENTATIONS WHETHER EXPRESS OR 

IMPLIED OR OTHERWISE, WITH RESPECT TO THE PRODUCT, AND 

SPECIFICALLY EXCLUDE ANY IMPLIED WARRANTIES OF FITNESS 

FOR A PARTICULAR PURPOSE OR MERCHANTABILITY OR OTHER 

IMPLIED WARRANTIES. Some states do not allow limitations on how long an 

implied warranty lasts, so the above limitation may not apply to you. 

IN NO EVENT WILL ALESIS BE LIABLE FOR INCIDENTAL, 

CONSEQUENTIAL, INDIRECT OR OTHER DAMAGES RESULTING 

FROM THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, 

INCLUDING, AMONG OTHER THINGS, DAMAGE TO PROPERTY, 

DAMAGE BASED ON INCONVENIENCE OR ON LOSS OF USE OF THE 

PRODUCT, AND, TO THE EXTENT PERMITTED BY LAW, DAMAGES 

FOR PERSONAL INJURY. Some states do not allow the exclusion or limitation of 

incidental or consequential damages, so the above limitation or exclusion may not 

apply to you. 

THIS CONTRACT SHALL BE GOVERNED BY THE INTERNAL LAWS OF 

THE STATE OF CALIFORNIA WITHOUT REFERENCE TO CONFLICTS 

OF LAWS. This warranty gives you specific legal rights, and you may also have other 

rights required by law which vary from state to state. 

This warranty only applies to products sold to purchasers in the United States of 

America or Canada. The terms of this warranty and any obligations of Alesis under 

this warranty shall apply only within the country of sale. Without limiting the 

foregoing, repairs under this warranty shall be made only by a duly authorized Alesis 

service representative in the country of sale. For warranty information in all other 

countries please refer to your local distributor. 

 

For more effective service 
and product update notices, 
please register your 
iMultiMix 8 USB online at: 

http://www.alesis.com/
support/warranty.htm

 

Summary of Contents for IMULTIMIX 8





































Reviews: