4
5
. Press the brake pedal.
Note:
If the brake pedal is pressed before the key is in the ON position, the engine will shut down.
D. TEMPORARY STOP FEATURE:
This feature allows the vehicle to remain running after the key has been removed from the
ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short
periods of time, but would like to leave the motor running and the climate control on.
. Before turning off the engine, press the
✱
button twice on the transmitter and the LED
indicator will flash times to confirm enter.
. Turn the ignition key to OFF position. (The engine will stay running.)
. The engine will run until the pre-programmed time elapsed or shutdown input is received.
Note:
For Standard Transmission Gear Vehicle: Before press the
✱
button, Pull up the hand brake
first.
E. TURBO TIMER MODE:
Turbo timer mode keeps the engine running after arriving at you destination for a programmable
period of / or 5 minutes, This allows the system’s time to conveniently cool down the turbo after
you have left the vehicle. To activate:
. While engine is running, place the transmission gear in the park position and pull up the hand
brake.
. Before turning off the engine, press and release and
✱
buttons at the same time.
-- The parking light wills turn on to indicate the remote start has entered turbo charge mode. --
. Pull off the “Ignition Key” from the key cylinder.
-- Engine keeps running. --
4. Exit and secure the vehicle.
-- Engine continues running until the pre-programmed time elapsed. --
F. TIMER / TEMPERATURE START:
This unit can be programmed to start and run the engine every hours or punctually at the same
time next morning, The engine will run for the programmed running time and then shut down.
ImpOrTANT:
Timer Start should be used only in open areas, Never start and run the vehicle in on
enclosed space as a garage or carport.
3 hours timer start with Temperature-control OFF:
This feature is design for an extreme cold
climate usage. The system will auto start the vehicle every hours, to prevent engine freezing and
hard to start.
A MAXIMUM OF SIX CYCLES CAN OCCUR.
3 hours timer start with Temperature-control:
If you programmed the temperature ON to
operate. The system can be programmed to automatically start the vehicle engine whenever the
temperature inside the vehicle reaches or drops below the preprogrammed temperature level.
The system will monitor the air temperature every hour and will only start the engine during
extreme cold temperatures. There is three-temperature level to choose form.
daily Timer Start:
The feature is very useful for the driver who wants to run the vehicle punctu-
ally at the same time next morning. Before set-up of the “Daily Timer Start”, you should set you
time for engine start.( see Timer Setting / Timer set-up for “Daily Timer Start, page 0)
ENTEr:
. Press the
✱
button twice to remote start the vehicle. As soon as the vehicle is running and
the parking light have turned on or flashing.
. Immediately depress the
button once, within seconds
-a.
3 hours Timer Start:
Rapidly depresses the
✱
button. The parking light will flash ()
times. The siren or horn chirps () times. The vehicle is now programmed to start every hours.
-b.
daily Timer Start:
Depress the transceiver
F
button first, within
seconds press
✱
(
∏
) button. The parking light will flash (6) times. The
siren chirps (6) times. The vehicle is now programmed to start at the real
time of the of the next day. Your set time for the next day engine start
flashes for approx. seconds on the LCD screen. After seconds the
∏
icon
stays displayed on the LCD screen.
4. Press the brake pedal to stop the vehicle running.
Exit the timer start:
Timer start can be exited manually as follows:
