0
F -
(-second)
Program Count Down (Parking)
Timer (0-Minute / 0M / 0
M /Hour /.5H / .0H)
Press within seconds to cycle
*leave the buttons starting
count down then
flashes
1. Screen Lamp ON:
Press and hold the
F
button one second, with one melody sound and the
LCD screen lamp will turns on for 5 seconds
2. Clear the Flash Icon and melody Sound:
Press the
F
button times within seconds will
clear the flash icon and melody sound on the LCD screen transceiver
3. Stop The Trigger melody Sound:
While triggering the alarm the LCD screen will alert user
through melody sound and flashing trigger icon, press any button on the LCD remote transmit-
ter to stop melody sound only.
4. Vibration / melody mode:
It is useful when you are in a noisy place and
difficult to hear beep sound from the remote control as the remote control
in this mode, vibrates itself if your security system is triggered.
Press the
F
button first, within seconds press and hold the button
for seconds to select the mode of vibration or melody, the
icon
will displayed on the LCD screen to show the LCD remote transceiver is on
vibration mode.
5. Low Battery Indication:
When the power of the battery weakens, it has two short “beep”
sound and flash
icon while pressing the button of the LCD screen transceiver.
6. Set Up Fixed Count down (parking) Timer:
. Press the
F
button first, within seconds press and hold the
button for seconds, the
LCD screen will shows icon and timer (ie. 0:0) ,
. Press the
button again showing next order time on the screen ( ie.0:0), press it again
(ie.0:0)…..and so on.
. Leave the buttons starting count down then
icon flashes
Note:
. The count down period is fixed as 0 minutes, 0 minutes, 0 minutes, hour, .5 hours and
hours maximum.
. When count down timer showing 0:00 means to turn off the timer.
. Press
F
button for real time indication when the timer is counting down.
7. Out Of range Indication:
If this feature is selected, the security system will automatically
check the range every 0 minutes after armed.
. If user is within the range, the icon will display on the LCD screen.
. If user is out of range, it has five short “beep” sounds and the icon will disappear on the
LCD screen.
D. TIMER SETTING:
Transceiver Button
Description
Press Transceiver Button
Press & Hold the
F
button for seconds
Timer Setting (Hour)
*Flashes digit for adjusting
✱
for
–
and
for
+
Press the
F
button once Time setting (Minute)
*Flashes digit for adjusting
✱
for
–
and
for
+
Press the
F
button once. Alert Alarm Time Setting (Hour)
*Flash digit for adjusting
✱
for
–
and
for
+
Press the
F
button once Alert Alarm Time Setting (Minute)
*Flashes digit for adjusting
✱
for
–
and
for
+
Press the
F
button once Alert Alarm Setting ON / OFF
✱
for
OFF
and
for
ON
Press the
F
button once Count Down Timer Setting (Hour)
*Flashes digit for adjusting
(Max.9 hours 59 minutes)
✱
for
–
and
for
+
Press the
F
button once Count down Timer Setting (Minute)
*Flashes digit for adjusting
✱
for
–
and
for
+
4
Press & hold the but-
ton for seconds
Daily Timer Start Timer Setting
Flashes
¿
/ Icon and “Hours” for
adjusting
✱
for
–
and
for
+
EXIT: Press and hold the
F
button for seconds or leave it for 0 seconds, the system will exit the
programming mode.
