background image

.                                                           .

8

WARNINGS:

As with any product that performs automatic functions, there are certain

safety precautions that you must practice and be aware of.

1. Keep all transmitters out of the reach of children.

2. Do not leave anyone in the vehicle while in Remote Start Mode.

3. Alert servicing personnel that the vehicle is equipped with a Remote 

Starter.

4. Do not start the vehicle by remote while it’s in an enclosed area or garage.

5. Always apply the parking brake and lock the vehicle when you exit the

vehicle.

6. Should the unit malfunction, disconnect the fuse until the problem is

corrected.

7. The use and operations of this system is the sole responsibility of the

operator.

8. Some areas may have local ordinances that prohibit leaving a vehicle

running on public streets.

IMPORTANT NOTICE

REMOTE START OPERATION

A. TO REMOTE START THE VEHICLE:

When you want to remote start your vehicle,
1. Press the   

button

 

twice

 on the transmitter.

2. The parking lights will flash to indicate the remote starter has received

the signal.

3. The engine will start in approximately 5 seconds.

4. Once the engine is running, after a few seconds the parking lights will

turn on and Heater/AC will activate and adjust the vehicles interior

temperature to your preset setting.

5. The vehicle will remote start and run for 5 to 30 minutes and automatically

shut down after the preset run time expires.

NOTE: 

The Remote Starter will not start the vehicle if any one of the

following conditions exists:

1. If the hood is opened.

2. If the brake pedal is pressed.

3. You moved the optional remote starter enable toggle switch to 

“OFF”

position. (If installed)

4. If the gear selector is in any gear other then 

“PARK”

 or 

“NEUTRAL”

5. Release the Emergency brake.

 

(For Manual Transmission Vehicles)

Summary of Contents for 450R















Reviews: