www.aleratec.com
64
Menu Overview
15. Utilities
- continued
15.2 Prescan
This feature allows you to scan and detect any bad sectors existing in the
Master Disc. It is recommended that you perform a Prescan before starting
the duplication task for all Master Discs. Approximately 50% of failures
reported by the duplicator are caused by errors in the Master Disc which
the Reader couldn’t overcome. When this kind of failure occurs, it tends to
waste all of your blank recordable medias.
15.3 System Info
By entering this menu, you will be able to see the many specification of
your duplicator such as the firmware version, CPU type, RAM capacity. You
can check the specifications by pressing
UP
or
DOWN
button.
15.4 Device Info
By entering this menu, you will be able to see the information for devices
built inside your duplicator. That information includes but limited to
manufacture, model number, etc.
15.5 Load Default
This function will reset all of the options back to manufacture’s default. You
can perform this function if your duplicator is acting abnormal. You need to
perform “Shutdown” and restart the system in order for this to take effect.
15.6 Update Firmware
This function will update the software of your duplicator. To update,
you need to insert manufacture Certified Update CD into the Reader and
select this function by pressing
ENT
button. We strongly suggest you to
not upgrade your duplicator’s firmware unless your duplicator is getting
unstable.
15.7 Save
This function will save all the settings you’ve modified since last time the
system is booted.
