www.aleratec.com
11
Overview
Using the LightScribe Labeling Software
The following procedure demonstrates using the LightScribe Template Labeler to
generate the label files (.lsi) used by the Stand-Alone Duplicator SA.
1. Launch the LightScribe Template Labeler.
▪ Click the shortcut on your desktop, or go to: Start → All Programs→
LightScribe Direct Disc Labeling → LightScribe Template Labeler.
Note:
Ignore the “LightScribe Disc Insertion” shown below by
pressing the
OK
button.
2. Select a Template. You must choose a template before moving to the next step.