Aleratec LightScribe Duplicator SA 260201, User Manual

Page: 49 / 82

www.aleratec.com 43
Stand-Alone Duplicator SA: Tutorials
4. Once you made your selection, you will see the following display:
OR
When you see the above display, insert an audio CD that contains your music
track(s) in the Master Reading Tray and a blank CD-R media into one of Writer
Trays.
Note: If either one of the above screens is shown for more than 2
minutes, please check your Master Disc or Blank Discs for quality.
Please allow 5-10 seconds for the duplicator to detect your Master Disc and
Blank Discs as well. After your Master Disc and Blank Discs have been
recognized, you will see the following display:
5. Once the previous screen is displayed, press the UP or DOWN arrow button
to display the information on each track of the audio CD. Press ENT to select
a track to be copied. Once a track is selected, you will see “*” on the left of
the track number on the 2nd line. You will also see the total tracks and total
playtime you have selected. Once you have finished selecting the tracks to be
copy, press the UP or DOWN arrow button until you see “ARE YOU DONE?”.
You will see the following display:
Preparing...
Waiting for Master
COPY USB PRINT SOURCE
ESC ENT


Preparing...
Waiting for Blank
COPY USB PRINT SOURCE
ESC ENT


Total: 0 Trk 0m : 0s
Track 1: 4m :31s
COPY USB PRINT SOURCE
ESC ENT


Total 6 Trk 26m : 17s
Are you done?
COPY USB PRINT SOURCE
ESC ENT

