Alencon CUBE: Installation,
Operation, and Maintenance Manual
40 |
P a g e
12.1.3 Conditions
Bootup in shutdown
If evaluated as true, CUBE goes automatically to SHUTDOWN state when turned on. By
default, the CUBE will be configured to evaluate as true, but this can be changed if necessary.
Control mode set
Available Control modes include:
•
Primary/Secondary current
•
Primary/Secondary power
•
Primary/Secondary Voltage
•
MPPT
•
STANDBY
For
control mode set
to evaluate as true; the control mode, the direction, the setpoint, and the
setpoint timeout must be written (except when control mode = MPPT or STANDBY).
Voltages, currents, temps within STARTUP range (Startup limits)
Tests operating conditions are in the permissible startup range as defined in the config file:
•
On board temperature
•
Transistor temperature
•
Primary and Secondary Voltages
Voltages, currents, temps within RUN range (Run limits)
Tests operating conditions are in the permissible run range as defined in the config file:
•
On board temperature
•
Transistor temperature
•
Primary and Secondary Voltages
•
Primary and Secondary Currents
Trip condition
Tests operating conditions
don’t exceed
the operating boundaries as defined in the config file:
•
On board temperature
•
Transistor temperature
•
Primary and Secondary Voltages
•
Primary and Secondary Currents
Curtailment (Curtailment enabled & curtailment limits)
Tests operating conditions have entered the curtailment zone as defined in the config file.
Corresponding curtailment options must be enabled within the config file as well, there are
many curtailment options available.
