radio Power
Select
ADR NWK PWR STA
1. Use the
Scroll
key to move the cursor to
PWr
.
2. Press
Enter
to display the
Radio Power Level
screen.
RADIO PWR LEVEL
20 dBm
3. Press
Enter
to return to the selection screen.
radio Status
the Radio Status options are:
•
nWK ConnECtEd – the network is connected and operational.
•
SERIAL ERRoR – there is a radio communication error on the serial bus between the keypad and the radio.
Select
ADR NWK PWR STA
1. Use the
Scroll
key to move the cursor to
STA
.
2. Press
Enter
to display the
Radio Status
screen.
RADIO STATUS
NWK CONNECTED
3. Press
Enter
to return to the selection screen.
Change Channel
the Change Channel option is used to select a different RF channel if the current channel is noisy.
Select
CHA ... ... ...
1. Use the
Scroll
key to move the cursor to
CHA
.
2. Press
Enter
to display the
Radio Network
screen.
RADIO NETWORK
CHANNEL CHANGE
3. Press
Enter
to select a new channel.
RADIO COMMAND
SUCCESS
4. the screen displays the radio command status.
SER RFC-PLUS
Fluid Management System
Page 17
Revision (09-13)
Alemite LLC
