51
4.3 Indoor temperature and humidity:
HI AL
LO AL
IN
HI AL
LO AL
1
2
3
4
2
1.
Temperature indoors
2.
Appears when the max. or min. alert is set
3.
Trend indicator (higher/equal/lower
,
and
)
4.
Relative humidity indoors
3
4.4 Outdoor temperature and humidity:
OUT
HI AL
LO AL
HI AL
LO AL
1
6
7
4
2
1.
Channel setting (when using multiple external Thermo /Hygro
sensors (not available))
2.
Low battery indicator outdoor unit
3.
Scan indicator (only when using multiple external sensors)
4.
Indication that the 3 in 1 outdoor sensor is displayed. (Press the
button to switch between 1, 2, 3 and the outdoor unit
)
5.
Reception strength indicator outdoor unit
6.
Appears when the max. or min. alert is set
7.
Trend indicator (higher/equal/lower
,
and
)
8.
Temperature display outdoors
9.
Relative humidity outdoors
3
5
8
6
9
7
no sensor
searching for con-
tact with sensor
good reception
average reception
no reception
• When the signal from the outdoor unit is lost for 15 minutes, the measurement values -- are displayed.
• If the signal from the outdoor unit is not restored within 1 hour, “Er” appears in the display.
• After 48 hours the indoor unit must be re-registered by removing and replacing the batteries or by press-
ing the “
SCAN
” button.
4.5 Weather forecast:
sunny
partly cloudy
cloudy
rainy
storm (flashing)
snow
Remarks:
•
The accuracy of a weather forecast based on air pressure is 70% to 75%; attention, a correct weather
forecast cannot be guaranteed.
•
The weather forecast is based on the coming 24 ~72 hours and does not necessarily represent the
actual situation.
•
The prediction ‘snow’ is based on air pressure combined with the temperature; when the forecast is in
fact ‘rain’ but the outdoor temperature is below -3°C (26°F), then ‘snow’ will be expected.
