20
8
TIPS AND WARNINGS
8.1 GENERAL:
• Read the user manual carefully and follow all instructions.
• Never place or use the baby unit(s) or parent units in a wet or humid room or area.
•
See to it that the heat is correctly flown out; never cover the parent unit, the baby unit(s) and/or
the power adapter and never place it directly next to a heat source.
• Only use the supplied adapter(s); connecting a different type of adapter may damage the electro-
nics.
• Make sure that the adapter cables don’t get damaged and prevent these cables to cause stum-
bling or falling.
•
Never disassemble the parent unit, the baby unit and/or the power adapter(s); only qualified
personnel should do this.
8.2 INSTALLATION:
• Only connect or disconnect the power adapter to the baby unit or the parent unit when the power
adapter is taken from the power outlet.
• Never install the DVM-80 during a thunderstorm.
• Avoid touching any not insulated adapter cords unless the adapter cords have been taken from
the power outlet.
8.3
INTERFERENCE FREE:
• This baby image monitor is digitally coded. You will never receive the signal of other equipment
nor will the signal of your baby unit(s) be displayed on the parent unit of, for example, your
neighbors.
• In the case the baby unit(s) or the parent unit is located in or in the close range of electric mag-
netic fields, than the signal (video or audio) can experience some disturbance. In this case try
a different location for the baby unit(s) or the parent unit or move, if possible, the source of the
interference.
8.4
EAVESDROPPING/INTERCEPTION:
• Eavesdropping or interception of this baby image monitor is almost impossible. Not only is it
necessary to be in the range of the baby image monitor, also expensive equipment is needed to
do this.
Summary of Contents for DVM-80
Page 1: ...USER MANUAL DVM 80 DVM 81 ...
