11
4.5 PARENT UNIT VOLUME:
• Push button repeatedly to increase the receiver volume.
• Push button repeatedly to lower the receiver volume.
In case the ‘ zooming’ (see section 4.4) is switched on, you cannot adjust the volume; first turn
off ‘ zooming’.
• In case the display is switched on, the volume level appears at the top of the display.
•
= max volume,
= min volume,
= sound off
• In case you turn off the sound, then also lights the indicator . This gives you, even when the
image is turned off, an indication that you have muted the sound.
In case you have activated the vibration function on the parent unit (see section 5.6), then, as
soon as you turn off the sound, the vibrator will activate momentarily as confirmation that the
‘vibrating alarm is enabled.
• Upon reaching the max or min value 2 short beep tones sound.
ATTENTION: When the baby is sleeping peacefully and the baby unit picks up no sound, then the
speaker of the parent unit will be completely turned off while still holding picture. Once the baby ma-
kes noise, the speaker is turned on again. If you want to hear all the noises from the nursery, then
set the enable mode at level 5, see section 5.3.
4.6
BABY UNIT VOLUME:
• Press repeatedly to increase the volume of the baby unit, for example, for the lullabies
and the talk back function.
• Push button – repeatedly to lower the volume.
4.7 TALK BACK:
• Push button
to talk back to the baby unit. You can talk as long as you press the TALK but-
ton. At the baby unit you can adjust the volume with b and - .
Talk back is not possible in multi-camera mode.
• In case you have activated the lullabies, the playing will be temporarily suppressed, while talking
back.
• If you had turned off the sound of the parent unit, then it automatically turns back on, after you
press the button
.
Summary of Contents for DVM-80
Page 1: ...USER MANUAL DVM 80 DVM 81 ...
