17
5.6 VIBRATION MODE:
You can have the DVM-80 shortly vibrate as extra attention if the baby unit hears a sound after a
silence of 20 seconds.
1. Push button
M
2. Push button or to scroll to
VIBRATION
3. Push button
M
4. Use button or to switch this function on or off and also choose from ‘always on’, or only on
when the speaker is turned off
5. Push button
M
to set your choice
6. Push button to close the menu
Once you activate this vibration mode, it is activated shortly for confirmation.
5.7 ALARM TONE WHEN BATTERY EMPTY / OUT OF RANGE:
You can sound an alert tone as a warning that the batteries of the baby unit or the parent unit are
running low or that the connection between the baby unit and the parent unit has been lost.
1. Push button
M
2. Push button or to scroll to
ALERT TONE
3. Push button
M
4. Use button or to select the battery low alarm or the connection alarm
5. Push button
M
6. Use button or to switch the concerning alarm on or off
7. Push button
M
to set your choice
8. Push button xx 2x to close the menu
The alarm tones also sound when the volume is set at 0 (no sound). The parent unit can only
check the battery voltage or the contact with the baby unit when the parent unit is connected
to this baby unit.
5.8
BRIGHTNESS:
You can adjust the brightness of the image as follows:
1. push button
M
2. use button or to scroll to
LCD BRIGHTNESS
3. push button
M
4. Use buttons or to adjust the preferred brightness
5. push button
M
to set your choice
6. push button to close the menu.
A low brightness uses less power; for mobile use it is advisable to set a lower brightness to
make the battery pack last as long as possible.
Summary of Contents for DVM-80
Page 1: ...USER MANUAL DVM 80 DVM 81 ...
