background image

5

2.3  ICONS ON THE DISPLAY:

upper part of the display, during normal use

 indicates the reception strength:

 

 strong reception

 

 good reception

 

 average reception

 

 bad reception

 

 minimum reception

 or 

 indicates which camera you’re wat-

ching, when using only one camera this is always 

 indicates that the ‘surveillance mode’ is enabled (only 

applies when using multiple cameras, the images are 

shown one after the other)

 indication that the zoom mode is activated

 indicates that the IR lighting is enabled for night 

vision

 volume set to 0 (speaker turned off)

,  ,  ,   or  : indication of the set VOX level (auto-

matic activation when the baby is crying), for this refer to 

chapter 4.3

 temperature display of the baby room

 battery indication:

 

 battery is empty

 

 battery is full

 

 > 

 > 

 >

 animation while the battery is 

 charging

 appears when the adaptor is connected and the bat-

tery is not or incorrectly installed

icons on the display during setup:

 in this menu, you can set the display brightness

 in this menu, you may set the feeding timer, for this 

refer to chapter 4.3

Summary of Contents for DVM-77





















Reviews: