Alecto DVM-77, User Manual

Page: 14 / 20

14
Alert sounds on/off:
In case you’ve turned off the sound (volume at 0), but the
baby has been crying for over 1 minute, the baby monitor
can still alert you to these noises by sounding an alert tone
every minute.
1. Press the MENU button and use the or button to
scroll to the option.
2. Use the and buttons to choose between:
illuminated in red: this function is enabled
illuminated in red: this function is disabled
3. Press the
MENU
button to save your setting and to
leave the menu.
Switching sound on/off automatically: (VOX)
You can set the parent unit loudspeaker to turn off when
the baby is sleeping quietly and the baby unit is not detec-
ting any sound, and turning on again as soon as the baby
starts to cry.
Here you can set the trigger level for turning on the loud-
speaker:
1. Press the MENU button and use the or button to
scroll to the option
2. Use the and buttons to decrease or increase the
sensitivity level.
3. Press the MENU button to save your settings and leave
the menu.
4. On top of the screen you can see the level you just
selected:
• v1: low sensitivity, the speaker turns on only when
loud sounds are being detected
• v2 - v4: in-between-steps, we suggest to try the
best level in practice
• v5: maximum sensitivity, the speaker remains
switched on