Alecto DVM-77, User Manual

Page: 15 / 20

15
5 MULTI CAMERA
5.1 INTRODUCTION:
You can register up to a maximum of 4 baby units (came-
ras) on the DVM-77 parent unit. Separate cameras are
available via the service department of Alecto via internet
www.alecto.nl
Order nr.: DVM-75C
See paragraph 4.2 (Multi-camera) for instructions on how
to switch to the image from other cameras.
5.2 REGISTERING ADDITIONAL CAMERAS:
1. Connect the power adaptor supplied with the camera
to the new camera and turn the camera on (also see
paragraph 3.1 of this manual).
2. Press the
MENU
button on the parent unit and use the
or button to select the option.
3. Use the and buttons to select the number you
want to assign the camera to and press the MENU
button.
4. An hourglass will appear on the display to indicate
that the parent unit is currently searching for the new
camera.
5. Press and hold the PAIR button on the baby unit
until after 10 seconds the image of the new camera
appears on the display of the parent unit.
The new camera is now registered and ready for use.
5.3 LOG OUT ADDITIONAL CAMERAS:
Follow the steps below to deregister faulty cameras or
cameras no longer in use:
1. Press the MENU button on the parent unit and use the
or button to select the option; the display will
now show the numbers of all registered cameras.
2. Use the and buttons to select the camera you
want to deregister.
3. Press the MENU button, X and V appear on the
display.
4. Use the and buttons to select the V option to
deregister the camera (or select X to cancel the
deregistration)
5. Press the
MENU
button to confirm the deregistration.