
9
4.7
RECEPTION INDICATOR / OUT OF RANGE MESSAGE:
•
In the upper left-hand corner of the image on the monitor unit, there is an indication of the
strength of the signal being received from the camera unit.
: very good reception, : standard good reception, : reasonable reception
•
In all cases, the audio and video quality is shown with the same level.
•
As soon as the signal strength is insuffi cient to receive audio and video (only lights up),
the warning ‘NO LINK’ appears in the image. After a few seconds the screen goes black,
and the range light starts fl ashing rapidly.
•
If any button on the monitor unit is pressed, the screen lights up with the message ‘Waiting
for connection...’. After approximately 10 seconds, the screen goes black again.
•
As soon as the monitor unit and the camera unit are back in range of each other, the im-
age lights up continuously.
the same happens if the camera unit is switched off with the on/off button or if the bat-
teries become empty in the case of mobile use
4.8 LULLABIES:
You can play lullabies from the camera unit. You can start and stop these lullabies both directly
on the camera unit and via the monitor unit.
Camera unit:
• Press
the button to start the lullabies.
•
Lullaby 1 is played repeatedly for 15 minutes.
• Press
the button to select a different lullaby.
•
Adjust the volume by pressing the + and - buttons.
•
The lullaby stops playing automatically after 15 minutes, or you can stop it before that
time by pressing the
button.
it is not possible to enter a setting on the camera unit to play all the songs, the select-
ed song is played repeatedly for 15 minutes
Monitor unit:
1. press
the
M
button to open the menu
2. scroll
with
or to the ‘LULLABY’ option
3. press
the
M
button
4. use
or to select the desired lullaby or select ‘All’ to play all the songs one after an-
other
5. press
the
M
button
6. use
or to select the option ‘Play’
7. press
the
M
button, the lullaby starts playing
8.
repeat the above instructions, but in step 6 select the option ‘Stop’ to stop the lullaby play-
ing
if one lullaby is selected, it is played repeatedly for 15 minutes
if ‘All’ is selected, all the lullabies are played one after another; this lasts around 3
minutes in total, after which the playback ends
if ECO mode is enabled, fi rst press the
button in order to switch the lullabies on or
off from the monitor unit
Summary of Contents for DVM-70
Page 1: ...DVM 70 USER MANUAL...