
8
4 USAGE
4.1 SWITCHING
ON/OFF:
•
Briefl y press the button to switch the unit on.
•
Keep this button pressed for 2 to 3 seconds to switch the unit off.
4.2 CONNECTION
INDICATOR:
•
As soon as the monitor unit is switched on, the connection indicator
fl ashes rapidly
and the monitor unit starts searching for the camera unit. Once the camera unit has been
found, this indicator will light continuously or will start fl ashing at a slow pace.
4.3
MONITOR UNIT VOLUME:
• Press
the
VOL
button repeatedly to increase the receiver volume.
• Press
the
VOL
button repeatedly to reduce the receiver volume.
•
If the screen is switched on, the volume level is displayed at the top:
= max vol-
ume,
= min volume,
= sound off
•
If you have switched off the sound, the lamp also lights up. This gives you an indication
that you have turned off the sound, even if the video is switched off.
•
when the max. or min. value is reached, 3 short beeps will be heard
if you have switched on the vibrating alarm (see section 6.3), the vibration will be
activated as soon as you turn the sound off, as a confi rmation that the ‘vibrating alarm’
function has been enabled
if ‘Zoom in’ (see below) is enabled, you cannot adjust the volume; switch ‘Zoom in’ off
fi rst
ATTENTION: When your baby is sleeping and the baby-unit does not hear any sound, the loud-
speaker of the parents-unit will be switched off, irrespective the volume setting. As soon as the
baby makes any noise, the loudspeaker will be switched ON again.
4.4 ZOOM
IN:
• Press
the
button to see a close-up of the image.
• Use
the
or or or buttons to move up, down, left or right.
• Press
the
button again for normal viewing.
4.5
SWITCHING THE VIDEO OFF:
•
If ECO mode is not enabled, the video is transmitted continuously. You can turn this off by
pressing the
button. This does not affect the sound.
•
Press any button on the monitor unit to switch the video back on again.
•
As soon as one of the alarm functions is activated (see Chapter 6), the video is also
switched on.
4.6 TALKBACK:
• Press
the
button to talk back to the camera unit. You can talk for as long as you hold
the button pressed down. On the camera unit, you can adjust the volume with the + and -
buttons.
•
If you have activated the lullabies, they will be temporarily interrupted during the talkback.
Summary of Contents for DVM-70
Page 1: ...DVM 70 USER MANUAL...