7
Only use the supplied mains adapter with the small plug,
MOSO MSP-C0800IC6.0-5W-DE or HONR ADS-5Q-06 06005GPG or
TEN PAO INTERNATIONAL LTD, model nummer S006MV0600080.
(6VDC, 800mA,
)
Charging:
As soon as you connect the monitor unit to the mains adapter and plug the
adapter into a 230V wall socket, the battery will be charged.
• The
lamp lights up. This lamp lights up when and for as long as the bat-
tery is being charged, and turns off when the battery is full.
•
If the monitor unit is turned on and you have images, you will see the bat-
tery status in the top right of the screen. This battery symbol is animated
while the battery is being charged. When the symbol remains completely green, the bat-
tery is fully charged. When this symbol is red, the battery is almost empty.
if, instead of the symbol of a battery, the symbol of a 230 V plug lights up, the battery
has not been inserted; in this case, the
lamp is only an on/off indicator: illuminated
when the monitor unit is on, off when the monitor unit is off
•
Before using the unit for the fi rst time, you should charge the battery for at least 15 hours,
even if the indicator shows that the battery is full.
•
The charging circuit for the battery is controlled electronically; there is no danger of
overloading, so you can leave the mains adapter continuously connected. In the event
that you will not be using the unit for an extended period of time, it is recommended that
you should remove the mains adapter from the wall socket. When you start using the unit
again, be sure to fi rst charge the battery well.
Automatic night vision:
•
The camera unit includes 8 built-in infrared LEDs; these LEDs are automatically switched
on when it becomes dark around the camera unit, and automatically switched off when it
becomes light.
•
These LEDs can illuminate objects up to a distance of approximately 2 metres.
•
Please note that in the darkness, i.e. when the night vision LEDs are switched on, the im-
age on the monitor will appear in black and white.
Please note: Infrared light cannot be perceived by the human eye; this means that
you cannot see that these LEDs are on with the naked eye. Depending on the type of
infrared LED, a red glow may, however, be visible.
Outdoor use:
•
The monitor is not waterproof and is therefore only suitable for indoor use. If used out-
doors, this monitor unit must be protected from moisture and sand.
6VDC / 800mA
Summary of Contents for DVM-70
Page 1: ...DVM 70 USER MANUAL...