5
Batteries:
1.
Unlock the battery cover of the camera unit by placing a fl at, blunt object in the slot on the
bottom of the camera unit; the battery cover can now be released from the camera unit.
2.
Insert 4 x 1.5 V batteries, size AA (R6), in the battery compartment as indicated. High-
quality alkaline batteries should preferably be used.
it is possible to insert rechargeable batteries, but since the camera unit is not
equipped with a charging device, rechargeable batteries must be charged in an
external battery charger when empty
3.
Replace the battery cover on the camera unit and snap it in place.
Mains adapter:
1.
Connect the 6V mains adapter with the large plug to the 6V DC jack on
the right-hand side of the camera unit.
2.
Plug the mains adapter into a 230V socket.
Only use the supplied adapter with the large plug, MOSO MSP-
C0800IC6.0-5W-DE or HONR ADS-5Q-06 06005GPG or TEN PAO
INTERNATIONAL LTD, model nummer S006MV0600080.
(6VDC, 800mA,
)
Tripod:
The bottom of the camera unit is equipped with a tripod attachment point. You can use this to
screw the unit on to a stand or tripod. (not supplied)
Tilting camera:
The camera in the camera unit can be angled downwards. Unlock the
camera by pulling it forwards at the top, using your fi ngernail for example.
You can angle the camera approximately 45 degrees downwards. Push the
camera back in the housing to fi x it in position again. It is not possible to
rotate the camera to the left or right; to do that, you need to move the entire
camera unit.
6VDC / 800mA
Summary of Contents for DVM-70
Page 1: ...DVM 70 USER MANUAL...