Alecto DVM-190, User Manual

Page: 11 / 36

11
Power adaptor:
1. Connect the 6V power adaptor with the small plug to
the 6V DC input at the right side of the baby unit.
2. Plug the adaptor into a 230V wall socket.
Make sure nobody can trip or fall over the
adaptor cable. You can bundle cables that
are too long with tape or cables ties availa-
ble specifically for this purpose.
Charing:
The battery starts charging as soon as you connect the
parent unit to the power adaptor and plug the adaptor
into a 230V wall socket.
• The indicator will light up as soon as and for as long as the battery is
charging. The indicator turns off when the battery is fully charged.
• If the parent unit is switched on and you are receiving images, the battery
status will be indicated in the top right corner of the display. This battery
symbol continues scrolling while the battery is being charged and stays green
when the battery is fully charged. This symbol turns red when the battery is
nearly exhausted.
• For initial use, charge the battery for at least 15 hours, even if the indicator
shows a fully charged battery.