Alecto DVM-190, User Manual

Page: 19 / 36

19
Only the image shown with an upper and lower dotted line is ‘live’ and all
other images are frozen.
In this mode, no sound is reproduced and the talk-back function is
unavailable.
You can view the ‘live’ images on full screen by pressing the VIEW button,
after several seconds the multi-display will be automatically restored.
When all registered baby units are set to sensitivity level 1~4 and all baby
units are switched off because no sound is being detected, the display will
turn black. As soon as one of the baby units detects sound, the display
will turn back on in Multi-camera mode. This means you only know that
one of the baby units has detected sound, you’ll know which baby unit
after you activate the Single Baby Unit mode and check all baby units one
by one.
[Patrol mode] to view all cameras one after the other; you’ll see the images
of all registered cameras one after the other in intervals of 8 seconds or you
can press the
VIEW
button to instantly go to the next camera.
In this mode, the unit will NOT automatically switch to the camera where
sound is being detected.
If only one camera is registered, these display options are not applicable.