13
OPERATION
1. Place the pot (without lid) or bottle in the container and fill the space between
the bottle and the inner container with water up to half the bottle's content.
2.
Turn the control knob into position
(35ºC for the warming of milk, 70ºC for the
heating of food).
3. Plug the Baby Bottle Warmer into the mains socket.
4. The indication lamp lights, indicating that the water is being heat up. As soon
as this lamp dims, the water has reached its temperature and from now on the
lamp will go on and off on a regular base, indicating that the water is kept on
the set temperature.
5. The time it needs to warm up the milk or the food depends on the quantity and
on the temperature the mik or food has before heating up. (room temperature
or coming from fridge).
6. Stir the contents of the bottle or pot frequently for more rapid distribution of
heat
.
7. After a few minutes the food will have reached just the right temperature for
your baby. Remove the bottle or pot from the container, turn the control knob to
'OFF' and disconnect the bottle warmer from the mains.
Check the temperature of the contents on the back of the hand first before feeding
it to the baby, to ensure that the temperature of the bottle contents are safe for
your baby. If the temperature is too hot, use less water in the inside of the bottle
warmer. In case the temperature is too low, use more water.