ALDI WB 12-2, User Manual, Page: 21 / 35

Operation
21
Cordless drill
meister-service@meister-werkzeuge.de
AFTER SALES SUPPORT
GB IRE
GB IRE
00800 34 99 67 53
Screwing and drilling
1. If you would like to drill or screw into soft wood, mark the applicable area.
2. Mount the rechargeable battery
7 in the cordless drill so that the contacts of the
rechargeable battery extend into the cordless drill. The rechargeable battery must
lock into the cordless drill.
3. Insert a drill bit
11
or the magnetic bit holder
12
with the desired bit
13
(see chapter “Inserting tools”).
4. Turn the torque adjustment ring 2
• to the symbol (drilling) if you would like to drill into wood, plastic or metal.
Do not use this setting when screwing.
• to the desired torque if you would like to screw: Low torque: small screws and
sensitive materials. High torque: large screws and robust materials. The torque
adjustment ring will then audibly lock into place.
5. Use the gear switch 3 to select 1st or 2nd gear. Do not push the On/Off switch 8
and the gear switch simultaneously to avoid damaging the cordless drill.
Speed 1: 0 to 400 rpm
Speed 2: 0 to 1300 rpm
Speed 1 is suitable for screwing and drilling a large bore diameter. Speed 2 is
suitable for drilling a small bore diameter.
6. Set the rotation direction of the quick-action drill chuck using the right-handed/
left-handed rotation selector 5 : Select right-handed rotation (arrow pointing
towards the quick-action drill chuck) so that the quick-action drill chuck turns clockwise.
Select left-handed rotation (arrow pointing away from the quick-action drill chuck) so
that the quick-action drill chuck turns counterclockwise.
The right-handed/left-handed rotation selector has a shift lock that engages if you
want to push the On/Off switch and the right-handed/left-handed rotation selector
at the same time.
7. Place
• the drill bit straight on the marking.
• the bit straight into the screw slot or slots.