ALDI WB 12-2, User Manual, Page: 15 / 35

Safety
15
Cordless drill
meister-service@meister-werkzeuge.de
AFTER SALES SUPPORT
GB IRE
GB IRE
00800 34 99 67 53
h) Always make sure there is adequate ventilation when recharging the
rechargeable battery. Gases may be produced.
i) Only charge the rechargeable battery in closed rooms as the charger
is only intended for indoor use.
j) Make sure that no moisture comes into contact with the charger.
Otherwise there is a risk of electric shock.
k) Do not use the charger for purposes other than intended! The charger is
only intended for charging the same rechargeable battery also shipped
with the charger. Using it for purposes other than intended may result in
fire or a fatal electric shock.
l) Do not attempt to charge the rechargeable battery with a charger
other than the enclosed one. The charger shipped with this power
tool and the rechargeable battery pack must be used together.
m) Only use the charger to charge the rechargeable battery. The charger
must not be used as a power supply for the power tool.
n) Do not charge any non-rechargeable batteries. Failure to heed this
notice will result in risks.
o) Do not place any objects on the charger and do not cover it as this
may cause it to overheat. Do not place the charger near a heat source.
p) Always lay the mains cord so that no one can trip over it, step on it or
otherwise damage it. Otherwise there is a risk of damage to property
and injury.
q) Always disconnect the charger from the power supply after use. This
way, you will prevent possible risks.
r) Before any kind of cleaning, disconnect the charger by pulling the
mains plug out of the power supply. Otherwise there is a risk of
electric shock!
s) Never pull the charger by the connector cord, instead always pull the
plug out of the socket. Never pull on the cable.
t) Do not use any extension cords unless it is unavoidable. Using an
extension cord that is not suitable may result in a risk of fire and electric
shock.
u) If the mains connection line of this device is damaged, it must be
replaced by the manufacturer, its customer service department or a
similarly qualified person in order to prevent risks.
v) Only connect the charger to a socket with an earthing contact.